// Copyright 2013 The Rust Project Developers. See the COPYRIGHT
// file at the top-level directory of this distribution and at
// http://rust-lang.org/COPYRIGHT.
//
// Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or
// http://www.apache.org/licenses/LICENSE-2.0> or the MIT license
// <LICENSE-MIT or http://opensource.org/licenses/MIT>, at your
// option. This file may not be copied, modified, or distributed
// except according to those terms.

//! Non-blocking access to stdin, stdout, and stderr.
//!
//! This module provides bindings to the local event loop's TTY interface, using it
//! to offer synchronous but non-blocking versions of stdio. These handles can be
//! inspected for information about terminal dimensions or for related information
//! about the stream or terminal to which it is attached.
//!
//! # Example
//!
//! ```rust
//! # #![allow(unused_must_use)]
//! use std::old_io;
//!
//! let mut out = old_io::stdout();
//! out.write_all(b"Hello, world!");
//! ```

use self::StdSource::*;

use boxed::Box;
use cell::RefCell;
use clone::Clone;
use panicking::LOCAL_STDERR;
use fmt;
use old_io::{Reader, Writer, IoResult, IoError, OtherIoError, Buffer,
         standard_error, EndOfFile, LineBufferedWriter, BufferedReader};
use marker::{Sync, Send};
use libc;
use mem;
use option::Option;
use option::Option::{Some, None};
use ops::{Deref, DerefMut, FnOnce};
use ptr;
use result::Result::{Ok, Err};
use rt;
use slice::SliceExt;
use str::StrExt;
use string::String;
use sys::{fs, tty};
use sync::{Arc, Mutex, MutexGuard, Once, ONCE_INIT};
use usize;
use vec::Vec;

// And so begins the tale of acquiring a uv handle to a stdio stream on all
// platforms in all situations. Our story begins by splitting the world into two
// categories, windows and unix. Then one day the creators of unix said let
// there be redirection! And henceforth there was redirection away from the
// console for standard I/O streams.
//
// After this day, the world split into four factions:
//
// 1. Unix with stdout on a terminal.
// 2. Unix with stdout redirected.
// 3. Windows with stdout on a terminal.
// 4. Windows with stdout redirected.
//
// Many years passed, and then one day the nation of libuv decided to unify this
// world. After months of toiling, uv created three ideas: TTY, Pipe, File.
// These three ideas propagated throughout the lands and the four great factions
// decided to settle among them.
//
// The groups of 1, 2, and 3 all worked very hard towards the idea of TTY. Upon
// doing so, they even enhanced themselves further then their Pipe/File
// brethren, becoming the dominant powers.
//
// The group of 4, however, decided to work independently. They abandoned the
// common TTY belief throughout, and even abandoned the fledgling Pipe belief.
// The members of the 4th faction decided to only align themselves with File.
//
// tl;dr; TTY works on everything but when windows stdout is redirected, in that
//        case pipe also doesn't work, but magically file does!
enum StdSource {
    TTY(tty::TTY),
    File(fs::FileDesc),
}

fn src<T, F>(fd: libc::c_int, _readable: bool, f: F) -> T where
    F: FnOnce(StdSource) -> T,
{
    match tty::TTY::new(fd) {
        Ok(tty) => f(TTY(tty)),
        Err(_) => f(File(fs::FileDesc::new(fd, false))),
    }
}

thread_local! {
    static LOCAL_STDOUT: RefCell<Option<Box<Writer + Send>>> = {
        RefCell::new(None)
    }
}

struct RaceBox(BufferedReader<StdReader>);

unsafe impl Send for RaceBox {}
unsafe impl Sync for RaceBox {}

/// A synchronized wrapper around a buffered reader from stdin
#[derive(Clone)]
pub struct StdinReader {
    inner: Arc<Mutex<RaceBox>>,
}

unsafe impl Send for StdinReader {}
unsafe impl Sync for StdinReader {}

/// A guard for exclusive access to `StdinReader`'s internal `BufferedReader`.
pub struct StdinReaderGuard<'a> {
    inner: MutexGuard<'a, RaceBox>,
}

impl<'a> Deref for StdinReaderGuard<'a> {
    type Target = BufferedReader<StdReader>;

    fn deref(&self) -> &BufferedReader<StdReader> {
        &self.inner.0
    }
}

impl<'a> DerefMut for StdinReaderGuard<'a> {
    fn deref_mut(&mut self) -> &mut BufferedReader<StdReader> {
        &mut self.inner.0
    }
}

impl StdinReader {
    /// Locks the `StdinReader`, granting the calling thread exclusive access
    /// to the underlying `BufferedReader`.
    ///
    /// This provides access to methods like `chars` and `lines`.
    ///
    /// # Examples
    ///
    /// ```rust
    /// use std::old_io;
    ///
    /// let mut stdin = old_io::stdin();
    /// for line in stdin.lock().lines() {
    ///     println!("{}", line.unwrap());
    /// }
    /// ```
    pub fn lock<'a>(&'a mut self) -> StdinReaderGuard<'a> {
        StdinReaderGuard {
            inner: self.inner.lock().unwrap()
        }
    }

    /// Like `Buffer::read_line`.
    ///
    /// The read is performed atomically - concurrent read calls in other
    /// threads will not interleave with this one.
    pub fn read_line(&mut self) -> IoResult<String> {
        self.inner.lock().unwrap().0.read_line()
    }

    /// Like `Buffer::read_until`.
    ///
    /// The read is performed atomically - concurrent read calls in other
    /// threads will not interleave with this one.
    pub fn read_until(&mut self, byte: u8) -> IoResult<Vec<u8>> {
        self.inner.lock().unwrap().0.read_until(byte)
    }

    /// Like `Buffer::read_char`.
    ///
    /// The read is performed atomically - concurrent read calls in other
    /// threads will not interleave with this one.
    pub fn read_char(&mut self) -> IoResult<char> {
        self.inner.lock().unwrap().0.read_char()
    }
}

impl Reader for StdinReader {
    fn read(&mut self, buf: &mut [u8]) -> IoResult<uint> {
        self.inner.lock().unwrap().0.read(buf)
    }

    // We have to manually delegate all of these because the default impls call
    // read more than once and we don't want those calls to interleave (or
    // incur the costs of repeated locking).

    fn read_at_least(&mut self, min: uint, buf: &mut [u8]) -> IoResult<uint> {
        self.inner.lock().unwrap().0.read_at_least(min, buf)
    }

    fn push_at_least(&mut self, min: uint, len: uint, buf: &mut Vec<u8>) -> IoResult<uint> {
        self.inner.lock().unwrap().0.push_at_least(min, len, buf)
    }

    fn read_to_end(&mut self) -> IoResult<Vec<u8>> {
        self.inner.lock().unwrap().0.read_to_end()
    }

    fn read_le_uint_n(&mut self, nbytes: uint) -> IoResult<u64> {
        self.inner.lock().unwrap().0.read_le_uint_n(nbytes)
    }

    fn read_be_uint_n(&mut self, nbytes: uint) -> IoResult<u64> {
        self.inner.lock().unwrap().0.read_be_uint_n(nbytes)
    }
}

/// Creates a new handle to the stdin of the current process.
///
/// The returned handle is a wrapper around a global `BufferedReader` shared
/// by all threads. If buffered access is not desired, the `stdin_raw` function
/// is provided to provided unbuffered access to stdin.
///
/// See `stdout()` for more notes about this function.
pub fn stdin() -> StdinReader {
    // We're following the same strategy as kimundi's lazy_static library
    static mut STDIN: *const StdinReader = 0 as *const StdinReader;
    static ONCE: Once = ONCE_INIT;

    unsafe {
        ONCE.call_once(|| {
            // The default buffer capacity is 64k, but apparently windows doesn't like
            // 64k reads on stdin. See #13304 for details, but the idea is that on
            // windows we use a slightly smaller buffer that's been seen to be
            // acceptable.
            let stdin = if cfg!(windows) {
                BufferedReader::with_capacity(8 * 1024, stdin_raw())
            } else {
                BufferedReader::new(stdin_raw())
            };
            let stdin = StdinReader {
                inner: Arc::new(Mutex::new(RaceBox(stdin)))
            };
            STDIN = mem::transmute(box stdin);

            // Make sure to free it at exit
            rt::at_exit(|| {
                mem::transmute::<_, Box<StdinReader>>(STDIN);
                STDIN = ptr::null();
            });
        });

        (*STDIN).clone()
    }
}

/// Creates a new non-blocking handle to the stdin of the current process.
///
/// Unlike `stdin()`, the returned reader is *not* a buffered reader.
///
/// See `stdout()` for more notes about this function.
pub fn stdin_raw() -> StdReader {
    src(libc::STDIN_FILENO, true, |src| StdReader { inner: src })
}

/// Creates a line-buffered handle to the stdout of the current process.
///
/// Note that this is a fairly expensive operation in that at least one memory
/// allocation is performed. Additionally, this must be called from a runtime
/// task context because the stream returned will be a non-blocking object using
/// the local scheduler to perform the I/O.
///
/// Care should be taken when creating multiple handles to an output stream for
/// a single process. While usage is still safe, the output may be surprising if
/// no synchronization is performed to ensure a sane output.
pub fn stdout() -> LineBufferedWriter<StdWriter> {
    LineBufferedWriter::new(stdout_raw())
}

/// Creates an unbuffered handle to the stdout of the current process
///
/// See notes in `stdout()` for more information.
pub fn stdout_raw() -> StdWriter {
    src(libc::STDOUT_FILENO, false, |src| StdWriter { inner: src })
}

/// Creates a line-buffered handle to the stderr of the current process.
///
/// See `stdout()` for notes about this function.
pub fn stderr() -> LineBufferedWriter<StdWriter> {
    LineBufferedWriter::new(stderr_raw())
}

/// Creates an unbuffered handle to the stderr of the current process
///
/// See notes in `stdout()` for more information.
pub fn stderr_raw() -> StdWriter {
    src(libc::STDERR_FILENO, false, |src| StdWriter { inner: src })
}

/// Resets the task-local stdout handle to the specified writer
///
/// This will replace the current task's stdout handle, returning the old
/// handle. All future calls to `print` and friends will emit their output to
/// this specified handle.
///
/// Note that this does not need to be called for all new tasks; the default
/// output handle is to the process's stdout stream.
pub fn set_stdout(stdout: Box<Writer + Send>) -> Option<Box<Writer + Send>> {
    let mut new = Some(stdout);
    LOCAL_STDOUT.with(|slot| {
        mem::replace(&mut *slot.borrow_mut(), new.take())
    }).and_then(|mut s| {
        let _ = s.flush();
        Some(s)
    })
}

/// Resets the task-local stderr handle to the specified writer
///
/// This will replace the current task's stderr handle, returning the old
/// handle. Currently, the stderr handle is used for printing panic messages
/// during task panic.
///
/// Note that this does not need to be called for all new tasks; the default
/// output handle is to the process's stderr stream.
pub fn set_stderr(stderr: Box<Writer + Send>) -> Option<Box<Writer + Send>> {
    let mut new = Some(stderr);
    LOCAL_STDERR.with(|slot| {
        mem::replace(&mut *slot.borrow_mut(), new.take())
    }).and_then(|mut s| {
        let _ = s.flush();
        Some(s)
    })
}

// Helper to access the local task's stdout handle
//
// Note that this is not a safe function to expose because you can create an
// aliased pointer very easily:
//
//  with_task_stdout(|io1| {
//      with_task_stdout(|io2| {
//          // io1 aliases io2
//      })
//  })
fn with_task_stdout<F>(f: F) where F: FnOnce(&mut Writer) -> IoResult<()> {
    let mut my_stdout = LOCAL_STDOUT.with(|slot| {
        slot.borrow_mut().take()
    }).unwrap_or_else(|| {
        box stdout() as Box<Writer + Send>
    });
    let result = f(&mut *my_stdout);
    let mut var = Some(my_stdout);
    LOCAL_STDOUT.with(|slot| {
        *slot.borrow_mut() = var.take();
    });
    match result {
        Ok(()) => {}
        Err(e) => panic!("failed printing to stdout: {:?}", e),
    }
}

/// Flushes the local task's stdout handle.
///
/// By default, this stream is a line-buffering stream, so flushing may be
/// necessary to ensure that all output is printed to the screen (if there are
/// no newlines printed).
///
/// Note that logging macros do not use this stream. Using the logging macros
/// will emit output to stderr, and while they are line buffered the log
/// messages are always terminated in a newline (no need to flush).
pub fn flush() {
    with_task_stdout(|io| io.flush())
}

/// Prints a string to the stdout of the current process. No newline is emitted
/// after the string is printed.
pub fn print(s: &str) {
    with_task_stdout(|io| io.write_all(s.as_bytes()))
}

/// Prints a string to the stdout of the current process. A literal
/// `\n` character is printed to the console after the string.
pub fn println(s: &str) {
    with_task_stdout(|io| {
        io.write_all(s.as_bytes()).and_then(|()| io.write_all(&[b'\n']))
    })
}

/// Similar to `print`, but takes a `fmt::Arguments` structure to be compatible
/// with the `format_args!` macro.
#[stable(feature = "rust1", since = "1.0.0")]
pub fn print_args(fmt: fmt::Arguments) {
    with_task_stdout(|io| write!(io, "{}", fmt))
}

/// Similar to `println`, but takes a `fmt::Arguments` structure to be
/// compatible with the `format_args!` macro.
#[stable(feature = "rust1", since = "1.0.0")]
pub fn println_args(fmt: fmt::Arguments) {
    with_task_stdout(|io| writeln!(io, "{}", fmt))
}

/// Representation of a reader of a standard input stream
pub struct StdReader {
    inner: StdSource
}

impl StdReader {
    /// Returns whether this stream is attached to a TTY instance or not.
    pub fn isatty(&self) -> bool {
        match self.inner {
            TTY(..) => true,
            File(..) => false,
        }
    }
}

impl Reader for StdReader {
    fn read(&mut self, buf: &mut [u8]) -> IoResult<uint> {
        let ret = match self.inner {
            TTY(ref mut tty) => {
                // Flush the task-local stdout so that weird issues like a
                // print!'d prompt not being shown until after the user hits
                // enter.
                flush();
                tty.read(buf).map(|i| i as uint)
            },
            File(ref mut file) => file.read(buf).map(|i| i as uint),
        };
        match ret {
            // When reading a piped stdin, libuv will return 0-length reads when
            // stdin reaches EOF. For pretty much all other streams it will
            // return an actual EOF error, but apparently for stdin it's a
            // little different. Hence, here we convert a 0 length read to an
            // end-of-file indicator so the caller knows to stop reading.
            Ok(0) => { Err(standard_error(EndOfFile)) }
            ret @ Ok(..) | ret @ Err(..) => ret,
        }
    }
}

/// Representation of a writer to a standard output stream
pub struct StdWriter {
    inner: StdSource
}

unsafe impl Send for StdWriter {}
unsafe impl Sync for StdWriter {}

impl StdWriter {
    /// Gets the size of this output window, if possible. This is typically used
    /// when the writer is attached to something like a terminal, this is used
    /// to fetch the dimensions of the terminal.
    ///
    /// If successful, returns `Ok((width, height))`.
    ///
    /// # Error
    ///
    /// This function will return an error if the output stream is not actually
    /// connected to a TTY instance, or if querying the TTY instance fails.
    pub fn winsize(&mut self) -> IoResult<(int, int)> {
        match self.inner {
            TTY(ref mut tty) => {
                tty.get_winsize()
            }
            File(..) => {
                Err(IoError {
                    kind: OtherIoError,
                    desc: "stream is not a tty",
                    detail: None,
                })
            }
        }
    }

    /// Controls whether this output stream is a "raw stream" or simply a normal
    /// stream.
    ///
    /// # Error
    ///
    /// This function will return an error if the output stream is not actually
    /// connected to a TTY instance, or if querying the TTY instance fails.
    pub fn set_raw(&mut self, raw: bool) -> IoResult<()> {
        match self.inner {
            TTY(ref mut tty) => {
                tty.set_raw(raw)
            }
            File(..) => {
                Err(IoError {
                    kind: OtherIoError,
                    desc: "stream is not a tty",
                    detail: None,
                })
            }
        }
    }

    /// Returns whether this stream is attached to a TTY instance or not.
    pub fn isatty(&self) -> bool {
        match self.inner {
            TTY(..) => true,
            File(..) => false,
        }
    }
}

impl Writer for StdWriter {
    fn write_all(&mut self, buf: &[u8]) -> IoResult<()> {
        // As with stdin on windows, stdout often can't handle writes of large
        // sizes. For an example, see #14940. For this reason, chunk the output
        // buffer on windows, but on unix we can just write the whole buffer all
        // at once.
        //
        // For some other references, it appears that this problem has been
        // encountered by others [1] [2]. We choose the number 8KB just because
        // libuv does the same.
        //
        // [1]: https://tahoe-lafs.org/trac/tahoe-lafs/ticket/1232
        // [2]: http://www.mail-archive.com/log4net-dev@logging.apache.org/msg00661.html
        let max_size = if cfg!(windows) {8192} else {usize::MAX};
        for chunk in buf.chunks(max_size) {
            try!(match self.inner {
                TTY(ref mut tty) => tty.write(chunk),
                File(ref mut file) => file.write(chunk),
            })
        }
        Ok(())
    }
}

#[cfg(test)]
mod tests {
    use prelude::v1::*;

    use super::*;
    use sync::mpsc::channel;
    use thread;

    #[test]
    fn smoke() {
        // Just make sure we can acquire handles
        stdin();
        stdout();
        stderr();
    }

    #[test]
    fn capture_stdout() {
        use old_io::{ChanReader, ChanWriter};

        let (tx, rx) = channel();
        let (mut r, w) = (ChanReader::new(rx), ChanWriter::new(tx));
        let _t = thread::spawn(move|| {
            set_stdout(box w);
            println!("hello!");
        });
        assert_eq!(r.read_to_string().unwrap(), "hello!\n");
    }

    #[test]
    fn capture_stderr() {
        use old_io::{ChanReader, ChanWriter, Reader};

        let (tx, rx) = channel();
        let (mut r, w) = (ChanReader::new(rx), ChanWriter::new(tx));
        let _t = thread::spawn(move || -> () {
            set_stderr(box w);
            panic!("my special message");
        });
        let s = r.read_to_string().unwrap();
        assert!(s.contains("my special message"));
    }
}